胶束增强型聚电解质微胶囊的制备

采用杂化碳酸钙微球作为模板, 利用LbL技术, 选择聚苯乙烯磺酸钠(PSS), 烯丙基胺的盐酸盐(PAH)和二烯丙基二甲基胺盐酸盐(PADA)聚电解质, 分别组装了PAH/PSS(弱/强)聚电解质胶囊和PADA/PSS(强/强)聚电解质微胶囊. 除去模板后得到了球形良好、分散均匀的聚电解质微胶囊. 研究结果表明, 利用杂化碳酸钙微球作为聚电解质微胶囊的模板, 得到的微胶囊的囊壁厚而致密, 同时, 由于组装采用的聚电解质的种类不同, 囊壁的微观形貌有较大差异.     

塑料成型工艺实习CAI课件的开发

针对当前学生实习面临的困难，以Authorware为开发工具，编制了塑料成型工艺实习CAI课件，整个软件图文并茂，图像，动画，解说，音乐相结合，形象地介绍了塑料各种成型工艺的主要原理，生产设备，工艺流程和相关产品，应用本软件学生可以进行模拟实习，该软件激发了学生学习的兴趣，提高了实习质量。     

Thermal behaviour of amorphous Li2ZrO3 prepared by sol-gel technique

The results of the investigations of thermal behaviour of Li₂ZrO₃, prepared in the amorphous state by means of sol-gel technique are demonstrated. The thermal treatment was carried out in air under constant heating rate of 5 deg·min^–1 and cooling rate of 2.5 deg·min^–1. The methods of DTA, TG, Emanation Thermal Analysis (ETA) and dilatometry were used, for characterization of the thermal behaviour in dynamic conditions. The X-ray diffraction patterns were used for characterization of the phase changes observed by TA Methods.

---

Zusammenfassung Ergebnisse aus Untersuchungen des thermischen Verhaltens von Li₂ZrO₃, hergestellt mittels einer Sol-Gel-Technik im amorphen Zustand werden dargelegt. Die thermische Behandlung wurde in Luft bei einer konstanten Aufheizgeschwindigkeit von 5 Grad·min^–1 und einer Abkühlgeschwindigkeit von 2,5Grad·min^–1 durchgeführt. Zur Beschreibung des thermischen Verhaltens unter dynamischen Verhältnissen wurden DTA, TG, Emanationsthermoanalyse und Dilatometrie angewendet. Zur näheren Charakterisierung der bei TG beobachteten Phasenumwandlungen wurde Röntgendiffraktion verwendet.

     

利用LB技术以寡聚DNA为模板构建CdS纳米结构

利用Langmuir-Blodgett技术制备了十八胺（ODA）／十聚腺嘌呤（oligo-A10)单分子膜，并以其为模板制备了不同形状的Cds纳米结构，结果表明以在低膜压下转移的寡聚DNA单层为模板可诱导生成线形的Cds纳米结构，而以在主膜压下转换的寡聚DNA单层膜板得到的是Cds的球形结构聚集体。     

用峰鉴别技术反相高效液相色谱法测定火锅汤料中微量吗啡

本文报道了以峰鉴别技术为定性依据的测定火锅汤料中微量吗啡的反相高效液相色谱法。本法采用改良的Ｓｔａｓ－ｏｔｔｏ法分离提取复杂样品中的微量吗啡。由于采用峰鉴别技术，增加了定性参数，大大提高了定性方法的准确性。本法简便、快速。最低检出浓度为０．０４ｍｇ／Ｌ。在数十例样品分析中，与其它仪器分析结果比照，非常符合。     

Quality assurance system for a decomposition method as demonstrated for the Wickbold combustion technique

 A five-step model for a quality assurance system is developed for an internal quality control check. It includes the quality control of the decomposition method and the detection method as steps belonging together. The Wickbold combustion technique as decomposition method in combination with atomic absorption spectrometry was chosen. The vaporization of the elements mercury, arsenic, lead, antimony and selenium is based on combustion in an oxyhydrogen flame. To check the efficiency of the analytical system, the uncertainty of results was calculated on the basis of the "Guide to the Expression of Uncertainty in Measurement". Received: 13 January 1997 · Accepted: 29 March 1997     

科学仪器工作状态监测装置的设计与实现

建立了支持网络通讯的科学仪器工作状态监测装置。该检测装置以单片机系统为核心,运用信号检测技术获取仪器的工作状态信息,实现有效机时的记录。基于自制编码表对数据进行BASE64编码,保证了记录信息的安全;支持嵌入式互联网技术将被监测仪器的实时状态上传到远程服务器,实现大型科学仪器的网络化监测。     

Deux methodes photothermiques a l'etude d'une preparation de contact d'un melange binaire de cristaux liquides

The photopyroelectric (PPE) method is proposed as a sensitive technique to study a binary mixture of liquid crystals in a contact preparation. The photothermal signal is generated while scanning the contact preparation. The crystal-smectic A, smectic A-nematic, and nematic-isotropic interphase boundaries are detected. The displacement of these boundaries due to the variation of the temperature is monitored. The study of these displacements allows us to draw the complete temperature-concentration phase diagram of a binary mixtures. This revised version was published online in August 2006 with corrections to the Cover Date.     

Estimation of parameters characterizing the adsorption of sodium,potassium, and rubidium cryptates at the mercury electrode/solution interface

The adsorption of complexes formed by sodium, potassium, and rubidium cations with macrobicyclic ligand (kryptofix 222 with C₁₈H₃₆N₂O₆ composition) is studied as a function of the ligand concentration on a stationary mercury drop in 0.1 M solutions of corresponding sulfates and chlorides by using the differential capacitance technique. Based on the model of two parallel capacitors supplemented by the Frumkin isotherm, the adsorption parameters of studied cryptates are estimated by using the regression analysis technique. Differential capacitance curves calculated with the parameters found are compared with experimental data. The comparison of the found adsorption parameters makes it possible to reveal the effects of the nature of included cations and specifically adsorbed supporting-electrolyte anions on the adsorption behavior of cryptates under study.__________Translated from Elektrokhimiya, Vol. 41, No. 4, 2005, pp. 475–481.Original Russian Text Copyright © 2005 by Stenina, Sviridova.